Trijicon 1×25 MRO Reflex Sight (2 MOA Green Dot Reticle, Full Co-Witness Picatinny Mount)

Description

Dial elevation corrections past 600 yards through Trijicon 1×25 MRO Reflex Sight units equipped with a 2 MOA green dot and fixed full co-witness Picatinny rail mounting. Featuring a 25mm window, 1/2 MOA clicks, and fixed cross-bolt clamping, this optic provides unlimited eye relief. The green dot provides superior contrast against outdoor foliage, though battery life is reduced compared to red LED emitters.

Constructed with an armored forged 7075-T6 aluminum outer shell, the housing protects internal collimating lenses from punishing drops onto concrete. Multi-coated optical glass surfaces provide crystal-clear light transmission while eliminating reflections that compromise tactical concealment. Weighing 5.8 ounces with mount and measuring 2.6 inches, this Trijicon combat optic contains full nitrogen gas purging that resists internal fogging under torrential rainfall down to 100 feet.

Key Features of Trijicon 1×25 MRO Green Fixed

Tactical carbine operators buy Trijicon 1×25 MRO reflex sight alternatives to secure rapid target engagement with the rock-solid stability of a fixed cross-bolt mount. The generous circular optical window provides clear sight pictures through awkward barricade positions.

• Forged 7075-T6 aluminum chassis resists structural deformation from severe weapon drops
• 1x non-magnified design allows operators to keep both eyes open for spatial awareness
• 25mm expansive objective window provides unrestricted target viewing through cover
• Green 2 MOA dot delivers immediate visual focus on close-range targets
• 1×25 MRO Reflex Sight features eight variable brightness levels for all environments
• Full co-witness fixed mount positions the optical axis at 1.5 inches above receiver rails
• Fixed cross-bolt Picatinny mount clamps receiver rails with solid mechanical retention
• Top-mounted ambidextrous brightness dial allows fast adjustments with either hand

Extreme Shock Hardening

The solid-state emitter housing utilizes dual erector retention points to withstand 1000G shock loads on .308 battle rifles without shifting reticle zero. Adjustment screws deliver crisp 1/2 MOA clicks with tracking accuracy within 1 percent across the 70 MOA travel spectrum. Built to function without electrical flickering from -20°F to 140°F, this MRO mechanism preserves operational readiness.

Mount Spacing Boundaries

The integrated base requires 1.5 inches of rail space on flat-top MIL-STD 1913 Picatinny carbine upper receivers. Tighten the cross-bolt mounting clamp to 30 in-lbs using a Torx wrench to eliminate mounting shift under recoil. Unlimited eye relief provides rapid aiming flexibility, while the 25mm window aligns comfortably with standard tactical stock welds.

Field Match Dynamics

A positive rotary switch allows fast illumination selection while wearing heavy winter shooting gloves. This rugged non-magnified reflex optic is not engineered for long-range precision varmint shooting past 300 yards, nor for small-target benchrest competitions.

• Clean reflex window glass using lens cleaner and microfiber cloths each outing
• Verify Picatinny rail mounting clamp torque using a hand driver every 300 rounds
• Replace internal CR2032 batteries and inspect compartment O-rings every 12 months

Verified Warranty Terms

Trijicon covers the optic with a limited lifetime warranty on chassis components and glass, alongside a 5-year warranty on electronic circuits. Inside the retail packaging, users receive the reflex sight, fixed full co-witness mount, CR2032 battery, cleaning cloth, Torx wrench, and tactical instruction guide.