Trijicon 1×25 MRO Reflex Sight (2 MOA Green Dot Reticle, Lower 1/3 Co-Witness Picatinny Mount)

Description

Track bullet trace through heavy mirage using Trijicon 1×25 MRO Reflex Sight optics equipped with a fixed lower one-third co-witness Picatinny rail mount and 2 MOA green dot. Featuring a 25mm window, 1/2 MOA clicks, and fixed cross-bolt clamping, this optic clears backup iron sights cleanly. The fixed mount prevents accidental detachment, though the lower 1/3 position requires standard AR comb heights.

Constructed from impact-resistant forged 7075-T6 aluminum, the chassis protects internal collimator optics from heavy rifle recoil cycles. Multi-coated optical glass elements maximize daylight light transmission while eliminating reflections that compromise tactical positions. Weighing 5.8 ounces with mount and measuring 2.6 inches, this Trijicon combat optic contains full environmental seals that survive complete water immersion down to 100 feet.

Key Features of Trijicon 1×25 MRO Green 1/3 Fixed

Tactical carbine operators buy Trijicon 1×25 MRO reflex sight alternatives to secure rapid target engagement with the rock-solid stability of a fixed cross-bolt mount. The lower 1/3 co-witness height keeps backup iron sights tucked into the bottom third of the viewing window.

• Forged combat aluminum chassis survives severe drops and violent slide cycling
• 1x non-magnified reflex profile provides complete situational awareness while firing
• 25mm circular optical window maximizes field of view through vehicle windshields
• 1/2 MOA elevation and windage adjusters provide firm tactile clicks during zeroing
• Green 2 MOA dot reticle delivers high contrast against bright daylight foliage
• Lower 1/3 co-witness fixed mount positions the optical axis at 1.66 inches above rails
• Top-mounted ambidextrous brightness dial allows fast adjustments with either hand
• Sealed internal battery compartment accepts standard CR2032 coin cells

Internal Erector Dynamics

Hardened diode housings and internal prism carriers absorb 1000G recoil forces on .308 battle rifles without shifting reticle zero. Elevation and windage screws provide crisp 1/2 MOA adjustments with precision tracking within 1 percent. The MRO internal system operates from -20°F to 140°F, preventing electrical cut-out during sub-zero field deployments.

Mounting Clearance Space

The lower 1/3 co-witness mount occupies 1.5 inches of flat-top Picatinny rail space on carbine upper receivers. Tighten cross-bolt mounting clamp screws to 30 in-lbs using a Torx driver. Unlimited eye relief allows versatile placement along upper receiver rails, while the optical window aligns over folded or fixed backup sights.

Field Usability Parameters

The top-mounted brightness control dial rotates smoothly with tactile detents, allowing gloved selection of brightness levels. This compact micro sight is not engineered for long-range precision rifle shooting past 300 yards, nor for high-magnification benchrest competitions.

• Wipe carbon fouling off lens glass using optical microfiber wipes every 200 rounds
• Confirm rail clamp cross-bolt torque with a precision hand driver every 500 rounds
• Replace internal CR2032 coin batteries and inspect compartment seals every 12 months

Verified Warranty Terms

Trijicon covers the MRO with a limited lifetime warranty against mechanical defects, with electronics covered for 5 years. Unboxing reveals the green dot sight, lower 1/3 fixed Picatinny mount, CR2032 lithium battery, adjustment wrench, and field manual.