Trijicon 1×25 MRO Reflex Sight (2 MOA Red Dot Reticle, Low & Lower 1/3 Co-Witness Picatinny Mount)

Description

Struggling with turret tracking backlash? The Trijicon 1×25 MRO Reflex Sight packaged with both low and lower 1/3 co-witness Picatinny mounts eliminates mounting uncertainty across multiple firearms. Built with a 25mm window, 2 MOA red dot, and dual modular risers, this sight speeds target acquisition. Having two distinct mounts allows weapon swapping, though swapping risers requires re-verifying zero coordinates.

Forged from one-piece aircraft-grade 7075-T6 aluminum, the rigid chassis protects internal glass and diode modules from heavy slide drops. Optical lens surfaces feature multi-layer anti-reflective coatings for maximum light throughput in low ambient lighting. Weighing 5.8 ounces with the tall mount and measuring 2.6 inches, this Trijicon tactical sight features complete environmental seals that prevent water penetration down to 100 feet.

Key Features of Trijicon 1×25 MRO Dual Mount

Tactical operators buy Trijicon 1×25 MRO reflex sight packages to adapt one premium red dot sight between flat-top AR carbines and low-comb shotguns or subguns. The kit includes both low and lower 1/3 co-witness mounting risers in the box.

• Armored 7075-T6 aluminum housing provides rugged protection against severe drops
• 1x unmagnified sight picture allows natural firing with both eyes wide open
• 25mm objective window provides generous eye placement during high-speed drills
• 1/2 MOA click adjustments register distinct mechanical detent feedback during zeroing
• Crisp 2 MOA red dot aiming point speeds close-quarters shot acquisition on steel targets
• Dual mount combo includes both low-profile and lower 1/3 co-witness Picatinny mounts
• Top-mounted ambidextrous brightness dial allows fast adjustments with either hand
• Multi-coated glass window sheds water droplets and carbon build-up rapidly

Recoil Shock Calibration

The internal optical LED assembly utilizes hardened solder mounts to prevent dot flickering through 1000G recoil cycles on 12-gauge shotguns and 7.62 NATO rifles. Elevation and windage screws deliver precise 1/2 MOA click values with tracking error under 1 percent. Operating reliably between -20°F and 140°F, this MRO system preserves zero alignment through extreme thermal cycles.

Chassis Ring Alignment

Both included mounts occupy 1.5 inches of rail space on flat-top MIL-STD 1913 Picatinny rails. Tighten riser cross-bolt screws to 30 in-lbs using a Torx driver to eliminate mounting shift under recoil. Unlimited eye relief provides rapid aiming flexibility, while the optical window aligns comfortably with varied stock configurations.

Field Usability Parameters

The top-mounted rotary brightness switch allows fast selection between reticle modes while wearing heavy winter shooting gloves. This rugged non-magnified reflex optic is not engineered for long-range precision varmint shooting past 300 yards, nor for small-target benchrest competitions.

• Wipe carbon fouling off lens glass using optical microfiber wipes every 200 rounds
• Confirm riser mounting screw torque on receiver rails every 500 rounds
• Replace internal CR2032 coin batteries and inspect compartment seals every 12 months

Verified Warranty Terms

Trijicon backs the optic with a limited lifetime warranty on structural housing parts and glass, with a 5-year warranty on electronic circuitry. The package includes the MRO red dot, low mount, lower 1/3 mount, CR2032 battery, Torx tool, and user manual.