Trijicon 1-6×24 VCOG Riflescope (Green Horseshoe Dot .223/55 Reticle, Thumbscrew Mount)

Description

Aircraft-grade 6061-T6 aluminum monotubes enclose the Trijicon 1-6×24 VCOG Riflescope forged with indestructible 7075-T6 combat housing and the calibrated .223/55 Horseshoe Dot reticle. Built with an integrated thumbscrew mount, 0.1 MRAD clicks, and 26 MRAD elevation travel, this optic incorporates first focal plane scaling. The combat housing withstands violent blast overpressures, though the 23.2-ounce weight increases rifle mass.

Milled from single-piece forged 7075-T6 aircraft aluminum alloy, the integrated housing prevents structural failure under extreme military combat conditions. Premium optical glass lenses provide edge-to-edge optical resolution and high daylight light throughput. Measuring 10.05 inches and weighing 23.2 ounces without mount, this Trijicon combat scope features nitrogen gas purging that meets rigorous waterproof immersion standards down to 66 feet.

Key Features of Trijicon 1-6×24 VCOG 55gr

Military infantry units buy Trijicon 1-6×24 VCOG riflescope systems to eliminate separate mounting rings and secure absolute zero retention under extreme battlefield abuse. The illuminated green horseshoe dot reticle provides rapid center-mass aiming and calibrated 55-grain bullet drop compensation.

• Forged 7075-T6 aluminum unibody housing withstands extreme military combat abuse
• 1-6x optical zoom transitions from true 1x close-quarters room entry to 6x distance fire
• 24mm objective lens delivers high visual definition across an expansive viewing window
• 0.1 MRAD capped turrets provide positive click detents without accidental movement
• 1-6×24 VCOG Green Horseshoe Dot reticle provides calibrated holdovers for 55gr 5.56 ammo
• First focal plane construction ensures valid ballistic holdovers across all magnifications
• Powered by a common AA battery delivering up to 700 hours of continuous run time
• Integrated thumbscrew mount clamps Picatinny receiver rails with rigid tension

Erector Mechanical Precision

Precision internal erector assemblies utilize heavy-duty erector springs to ensure precise tracking repeatability within 1 percent across the entire 26 MRAD adjustment range. Rated for 1000G shock loads, this Trijicon combat optic absorbs continuous automatic rifle fire without zero alignment shift. Internal erector springs resist thermal expansion from -20°F to 140°F, preserving zero stability through temperature swings.

Mount Clearance Guide

The integrated thumbscrew mount requires 4.0 inches of rail space on flat-top MIL-STD 1913 Picatinny carbine upper receivers. Tighten dual thumbscrew clamps to 45 in-lbs to eliminate mounting shift under recoil. The 4.0-inch eye relief provides ample clearance on combat rifles, while the optical centerline aligns perfectly with standard AR co-witness height.

Stand Field Operation

The integrated magnification dial features an aggressive fin that rotates with 10 in-lbs of rotational drag across variable outdoor temperatures. This 23.2-ounce combat optic is not built for precision benchrest rifle matches where 24x+ magnification is mandatory, nor for sporting handguns.

• Clean dust from objective glass surfaces using optical microfiber wipes every 200 rounds
• Check integrated thumbscrew clamp torque on receiver rails every 300 rounds
• Examine rotary illumination rheostat contacts and replace AA battery cells every 12 months

Trijicon Crate Manifest

Trijicon covers the VCOG with a limited lifetime warranty against manufacturing defects, with electronics covered for 5 years. The factory crate includes the riflescope, integrated thumbscrew mount, AA lithium battery, lens pen, user manual, and certified optical inspection documentation.