Trijicon 1-6×24 VCOG Riflescope (Green Segmented Circle .308/175 Reticle, Thumbscrew Mount)

Description

Track bullet trace through heavy mirage using Trijicon 1-6×24 VCOG Riflescope optics equipped with the Green Segmented Circle reticle calibrated for 175-grain .308 Winchester ammunition. Built with an integrated thumbscrew mount, 0.1 MRAD clicks, and 26 MRAD elevation travel, this optic incorporates first focal plane ballistic holdovers. The calibrated .308 grid simplifies long-range drops, though lighter 147-grain military ball requires trajectory compensation.

Constructed around a solid forged 7075-T6 aluminum housing, the chassis resists severe structural twisting on heavy battle rifles. Premium broadband optical glass features multi-coatings for exceptional light transmission and sharp contrast lines. This Trijicon tactical riflescope measures 10.05 inches overall, weighs 23.2 ounces, and features nitrogen gas purging that meets rigorous IPX7 submersion standards down to 20 meters.

Key Features of Trijicon 1-6×24 VCOG .308 Circle

Sniper teams buy Trijicon 1-6×24 VCOG riflescope packages to equip designated marksman rifles with rapid 1x close-quarters capability and precise 6x long-range 175-grain holdovers. The unibody housing eliminates ring slippage entirely under violent semi-automatic recoil.

• Forged 7075-T6 aircraft aluminum chassis provides unmatched combat survivability
• 1-6x zoom assembly provides versatile framing across close targets out to distance
• 24mm front objective glass gathers light for twilight target identification
• 0.1 MRAD tactile turret clicks register sharp distinct mechanical notches
• 1-6×24 VCOG Green Segmented Circle reticle provides calibrated drops for 175gr .308
• First focal plane etched glass ensures valid measurements across all magnifications
• Powered by a common AA battery delivering up to 700 hours of continuous run time
• Integrated thumbscrew mount locks receiver rails with solid mechanical tension

Recoil Hardened Erector

Internal erector assemblies rely on dual coil leaf springs to ensure precise tracking repeatability within 1 percent across the entire 26 MRAD elevation travel range. Rated for 1000G shock loads, this Trijicon platform withstands .308 Winchester recoil cycles without zero shift. The erector cell maintains precise reticle alignment from -20°F to 140°F, while sealed O-rings prevent internal lubricant evaporation.

Mount Spacing Boundaries

The integrated base occupies 4.0 inches of flat-top Picatinny rail space on carbine receiver surfaces. Adjust the dual thumbscrew mounting clamps to 45 in-lbs to eliminate rail play under violent firing schedules. Generous 4.0-inch eye relief provides natural two-eye aiming, while the optical window height matches standard carbine co-witness configurations.

Field Usability Parameters

The integrated zoom ring fin allows fast magnification adjustments with gloved fingers during combat patrols. This specialized military optic is not designed for fine precision target shooting past 600 yards, nor for lightweight mountain hunting platforms.

• Wipe dust from lens coatings using an optical lens pen every 250 rounds
• Confirm thumbscrew mount torque limits on Picatinny mounting fasteners every 500 rounds
• Inspect battery compartment seals and replace standard AA cells every 12 months

Factory Crate Manifest

Trijicon backs the optic with a limited lifetime warranty on optical and mechanical systems, with a 5-year warranty on electronic LED illumination components. Inside the shipping box, users receive the riflescope, integrated thumbscrew mount, AA lithium battery, lens pen, microfiber cloth, and instruction booklet.