Euromex NZ1902-U-ESD Safe Binocular Single Boom System

Description

Examine dense printed circuit assemblies without ESD risk using the Euromex NZ.1902-U-ESD Binocular Microscope single-arm boom workstation. Engineered specifically for electrostatic protected areas (EPAs), its entire chassis features a certified static-dissipative finish that drains surface charges away from sensitive microcircuits. The horizontal boom bar glides smoothly through an adjustable collar bracket, delivering 450 mm of overhang reach over sprawling circuit boards and mechanical enclosures.

Optical performance is driven by a 0.67x to 4.5x Greenough continuous zoom core providing 6.7x to 45x magnification, complete with click-stops for fast magnification checks. The 45-degree binocular head rotates 360 degrees and carries high-eyepoint HWF 10x/22 mm eyepieces with bilateral diopter adjustment collars. Anchored by a heavy 400 x 230 mm cast-iron base plate, the entire 18.5 kg frame stays completely stable during high-magnification manual rework, supported by a 400 mm vertical steel column that provides plenty of room for tools and pre-heaters.

Key Features of Euromex NZ.1902-U-ESD Binocular Microscope

An ESD-safe binocular stereo zoom microscope featuring a horizontal single-arm boom stand for electronic repair and manufacturing lines. Combines a 6.7x to 45x zoom drive with an 18.5 kg anti-static cast base, 450 mm horizontal reach, and wide 22 mm eyepieces.

• Electrostatic-dissipative coating prevents electrical overstress on delicate micro-components
• Horizontal gliding boom arm delivers 450 mm of reach across wide electronics workbenches
• Continuous 6.7x to 45x zoom magnification with tactile click-stops for rapid indexing
• High-eyepoint HWF 10x/22 mm widefield eyepieces with bilateral diopter compensation
• Heavy 400 x 230 mm cast-iron base plate provides 18.5 kg of vibration-damping ballast
• Solid 400 mm vertical steel pillar accommodates tall fixturing and long-working-distance setups
• Greenough stereoscopic layout yields genuine 3D spatial depth for precision micro-soldering
• Universal 76 mm focus carrier accepts external anti-static LED ring lights and goosenecks

Anti-Static Dissipation & Smooth Gliding Mechanics

In high-density electronics manufacturing, even an imperceptible 50-volt static charge can ruin micro-controllers. The dissipative surface coating on this stand continuously bleeds charge to ground, giving technicians an ESD-safe workspace. The horizontal gliding bar operates with low manual friction, letting operators sweep across multi-pin connectors and lock the position with a quick turn of the knurled steel lever.

18.5kg Free-Standing Base & Eyepoint Comfort

Weighing 18.5 kg, the heavy cast-iron footprint holds the microscope dead still, eliminating image wobble from bench bumps and nearby machinery. The 45-degree angled ocular tubes provide a natural head posture, while bilateral diopter rings ensure both eyes achieve razor-sharp focus simultaneously. The 400 mm vertical post gives you abundant clearance to work beneath the objective lens with soldering irons, hot-air wands, and inspection probes.

• Heavy free-standing base requires zero table clamping, preserving valuable desk surface
• Tactile zoom click-stops ensure consistent magnification settings across multi-shift audits
• Bilateral diopter adjustments prevent eye strain during long diagnostic inspection runs

Euromex Five-Year Mechanical Warranty Protection

Euromex covers the NZ.1902-U-ESD with a five-year factory warranty covering optical elements, internal prism alignment, and mechanical boom hardware against manufacturing defects. The complete factory package contains the ESD-safe NexiusZoom binocular head, heavy single-arm boom base frame assembly, 76 mm focus block module, rubber eyeguards, and user documentation.