Euromex NZ1903-B-ESD Safe Trinocular Boom Stand Optics

Description

Safeguard static-sensitive semiconductor dies while inspecting wide circuit boards using the Euromex NZ.1903-B-ESD Trinocular Microscope heavy-duty inspection workstation. Built around a massive 610 x 230 mm cast-iron floor-plate base, this 21.2 kg platform carries a double-arm boom extending 500 mm horizontally on smooth linear ball bearings. The entire chassis is treated with an electrostatic-dissipative coating to neutralize static buildup, while the 45-degree inclined trinocular head incorporates an integrated 23.2 mm vertical photo port with beam-splitter control for simultaneous video capture and high-eyepoint binocular viewing.

Powered by a 0.67x to 4.5x Greenough zoom engine, the optical system delivers continuous 6.7x to 45x magnification with tactile click-stops for repeatable calibration logs. High-eyepoint HWF 10x/22 mm eyepieces feature bilateral diopter adjustment collars across a 54 mm to 75 mm interpupillary span. The solid 400 mm vertical steel pillar allows smooth height adjustments for tall workpieces, secured by a heavy focus carrier that accepts standard external LED ring illuminators without electrical interference.

Key Features of Euromex NZ.1903-B-ESD Trinocular Microscope

An ESD-safe trinocular stereo zoom microscope featuring a dual-arm ball-bearing boom stand and a dedicated camera port. Combines a 6.7x to 45x zoom drive with a massive 21.2 kg anti-static cast base, 500 mm horizontal glide, and high-eyepoint 22 mm eyepieces.

• Electrostatic-dissipative chassis coating protects sensitive micro-electronics from static shock
• Dual-arm boom with linear ball bearings provides 500 mm of effortless horizontal stroke
• Dedicated vertical 23.2 mm photo port with mechanical beam splitter for digital archiving
• Continuous 6.7x to 45x zoom range with integrated click-stops for repeatable measurement logs
• Oversized 610 x 230 mm cast-iron base plate delivers 21.2 kg of vibration-isolated stability
• High-eyepoint HWF 10x/22 mm widefield eyepieces with bilateral diopter adjustments
• Solid 400 mm vertical steel pillar accommodates deep specimen fixtures and tall assemblies
• Accepts standard external ESD-safe LED ring lights and flexible fiber-optic guides

Double-Arm Ball-Bearing Glide & Linear Board Scanning

Single-boom arms can bind or pitch off-axis when carrying heavy cameras, but the dual hardened steel shafts on this stand distribute the weight evenly. Linear ball-bearing sleeves let technicians guide the optical pod across wide multi-layer motherboards with fingertip force, stopping instantly without backlash. The Greenough optical paths produce genuine 3D spatial depth, making delicate hand-soldering and trace repair feel completely natural.

21.2kg Anti-Static Ballast & Dedicated Video Output

Weighing over 21 kg, the dense cast-iron base anchors the microscope firmly without through-table bolts or edge clamps. The conductive surface finish drains static charges safely into earth ground, preventing costly field-effect transistor blowouts. Engaging the photoport beam splitter directs clean optical data to your digital sensor, letting you document micro-cracks on an inspection monitor while keeping both oculars active.

• Dual-rail boom design stops optical pod twisting and sagging under heavy camera loads
• Heavy-duty cast base keeps the center of gravity low even at maximum 500 mm reach
• Bilateral diopter rings balance visual focus for technicians wearing corrective eyewear

Euromex Five-Year Mechanical & Optical Warranty

Euromex protects the NZ.1903-B-ESD with a five-year factory warranty covering optical elements, linear bearing tracks, and chassis structural integrity under professional cleanroom use. The complete package contains the ESD-safe NexiusZoom trinocular head, double-arm boom stand assembly with cast-iron base, 76 mm focus block, 23.2 mm photo port extension tube, rubber eyeguards, and user manual.