Trijicon 1-8×28 VCOG Riflescope (Red Circle-Crosshair MRAD Reticle)

Description

True 30mm main tube internal travel anchors Trijicon 1-8×28 VCOG Riflescope units featuring the Red Circle-Crosshair MRAD reticle and rugged forged unibody construction. Supplying an integrated thumbscrew mount, 0.1 MRAD clicks, and 26 MRAD elevation travel, this optic incorporates first focal plane milliradian scaling. The 28mm objective expands exit pupil diameter, though the 31.5-ounce weight increases rifle mass.

Forged from aircraft-grade 7075-T6 aluminum bar stock, the unibody housing eliminates ring movement under heavy recoil forces. Multi-coated broadband lenses feature proprietary coatings that transmit high ambient photons for clean target separation at sunset. This Trijicon combat optic measures 10.8 inches in length, weighs 31.5 ounces with mount, and resists internal fogging through dry nitrogen gas purging.

Key Features of Trijicon 1-8×28 VCOG MRAD Red

Dynamic 3-Gun competitors and military marksmen buy Trijicon 1-8×28 VCOG riflescope models to standardize elevation and windage adjustments in milliradians across combat and match platforms. The daylight-bright red LED reticle provides instant visual focus across sunny outdoor stages.

• Forged 7075-T6 unibody construction provides extreme durability without mounting rings
• 1-8x magnification range resolves target silhouettes across close rooms to extended fields
• 28mm objective lens balances twilight brightness with low mounting profiles
• 0.1 MRAD capped turrets prevent accidental movement while moving through thick brush
• 1-8×28 VCOG Red Circle-Crosshair MRAD reticle allows universal milliradian holdovers
• First focal plane design keeps crosshair measurements true at every power setting
• Powered by a common AA battery delivering extended continuous operational runtime
• Integrated thumbscrew mount clamps receiver rails with rigid tension

Thermal Erector Stability

Dual steel erector springs maintain continuous pressure against the internal adjustment tube to resist reticle drift across 1000G recoil cycles. Adjustment dials provide crisp 0.1 MRAD clicks with tracking accuracy within 1 percent across the entire travel arc. Built to operate without grease migration between -20°F and 140°F, this Trijicon mechanism preserves shot-to-shot zero stability during cold winter deployments.

Chassis Ring Placement

The integrated thumbscrew mount requires 4.5 inches of rail space on flat-top MIL-STD 1913 Picatinny carbine upper receivers. Tighten dual thumbscrew clamps to 45 in-lbs to eliminate mounting shift under recoil. The 4.0-inch eye relief provides ample clearance on combat rifles, while the optical centerline aligns perfectly with standard AR co-witness height.

Tactical Handling Protocols

Smooth diopter adjustment collars allow fast reticle focus without gritty thread friction, while the rotary illumination dial offers eleven brightness steps. This 31.5-ounce scope is not designed for ultralight mountain rifles under 6 lbs where minimal pack weight is required, nor for short-range slug shotguns.

• Clear dirt from ocular lenses with canned air and soft brushes every hunt
• Verify thumbscrew base clamp tightness on receiver rails every 250 rounds
• Replace internal AA batteries and inspect compartment seals every 12 months

Verified Warranty Terms

Trijicon supports the original owner with a comprehensive limited lifetime warranty covering mechanical components, internal lenses, and waterproof seals, with 5 years on electronics. Unboxing reveals the combat riflescope, integrated thumbscrew mount, AA lithium battery, lens pen, cleaning cloth, and certified quality control sheets.