Trijicon 1-6×24 VCOG Riflescope (Red Segmented Circle-Crosshair MOA Reticle, Thumbscrew Mount)

Description

During freezing dawn PRS match stages the Trijicon 1-6×24 VCOG Riflescope equipped with the Red Segmented Circle-Crosshair MOA reticle delivers rapid minute-of-angle precision. Configured with an integrated thumbscrew mount, 1/4 MOA clicks, and 90 MOA elevation travel, this optic incorporates first focal plane MOA scaling. Minute-of-angle subtensions simplify holdoffs, though holdovers require 6x zoom for maximum visual separation.

Constructed from high-tensile forged 7075-T6 aluminum, the unibody structure prevents internal component misalignments from severe external bumps. Advanced multi-layer lens coatings reduce surface reflection while maximizing light throughput across visible color spectrums. This Trijicon tactical scope measures 10.05 inches, weighs 23.2 ounces, and seals against moisture using dry nitrogen gas to achieve true IPX7 ratings down to 66 feet.

Key Features of Trijicon 1-6×24 VCOG MOA Red

Practical competition shooters buy Trijicon 1-6×24 VCOG riflescope models to standardize elevation holdovers in minutes-of-angle across sporting rifles without mounting rings. The illuminated red segmented circle reticle guides eyes directly onto center target mass.

• Forged 7075-T6 aircraft aluminum chassis provides unmatched combat survivability
• 1-6x optical zoom provides rapid target acquisition from close steel out to distance
• 24mm objective lens system delivers high visual definition across an expansive viewing window
• 1/4 MOA adjustment clicks offer tactile and audible indexing per division
• 1-6×24 VCOG Red MOA reticle provides universal minute-of-angle holdovers
• First focal plane crosshairs maintain accurate scale at extreme zoom levels
• Powered by a common AA battery delivering up to 700 hours of continuous run time
• Integrated thumbscrew mount locks receiver rails with solid mechanical tension

Internal Erector Dynamics

A dual-spring erector mechanism applies continuous counter-tension against adjustment screws, maintaining tracking integrity within 1 percent through 90 MOA of travel. Engineered to sustain 1000G impact shocks, this Trijicon platform operates reliably on 5.56 NATO and .308 Winchester rifles. The mechanical core remains stable through temperatures ranging from -20°F to 140°F, preventing reticle cant or zero drift.

Chassis Ring Alignment

The integrated base occupies 4.0 inches of flat-top Picatinny rail space on carbine receiver surfaces. Adjust the dual thumbscrew mounting clamps to 45 in-lbs to eliminate rail play under violent firing schedules. Generous 4.0-inch eye relief provides natural two-eye aiming, while the optical window height matches standard carbine co-witness configurations.

Field Match Dynamics

The integrated zoom ring fin allows fast magnification adjustments with gloved fingers during combat patrols. This specialized military optic is not designed for fine precision target shooting past 600 yards, nor for lightweight mountain hunting platforms.

• Clean exterior lens glass surfaces using multi-coated optical solution every hunt
• Check thumbscrew base clamp tightness on receiver rails every 250 rounds
• Examine rotary illumination switch contacts and inspect battery seals every 12 months

Trijicon Crate Manifest

This optic includes Trijicon limited lifetime warranty coverage against mechanical failures, optical defects, and moisture penetration, with electronics covered for 5 years. The shipment contains the complete riflescope, integrated thumbscrew mount, AA lithium battery, lens pen, warranty registration card, and original quality assurance certificates.