Trijicon 1-6×24 VCOG Riflescope (Red Segmented Circle-Crosshair MIL Reticle, Thumbscrew Mount)

Description

Cut target engagement time down with Trijicon 1-6×24 VCOG Riflescope units featuring the universal Red Segmented Circle-Crosshair MIL reticle and forged unibody construction. Supplying an integrated thumbscrew mount, 0.1 MRAD clicks, and 26 MRAD elevation travel, this optic incorporates universal milliradian holdover trees. Milliradian subtensions remain true across all zoom steps, though the crosshair appears fine at 1x zoom without illumination.

Milled from single-piece forged 7075-T6 structural aluminum, the unibody chassis provides rugged durability without excess weight on dynamic carbines. Broadband optical glass features multi-coatings for high light throughput, while precision coatings shed external dust and moisture. Weighing 23.2 ounces and measuring 10.05 inches, this Trijicon combat scope features dry nitrogen gas purging that resists internal moisture penetration.

Key Features of Trijicon 1-6×24 VCOG MIL Red

Dynamic 3-Gun competitors buy Trijicon 1-6×24 VCOG riflescope systems to standardize elevation and windage adjustments in milliradians across combat and match platforms. The daylight-bright red LED reticle provides instant visual focus across sunny outdoor stages.

• Forged 7075-T6 aluminum unibody housing withstands extreme military combat abuse
• 1-6x optical zoom transitions from true 1x close-quarters room entry to 6x distance fire
• 24mm objective lens delivers high visual definition across an expansive viewing window
• 0.1 MRAD capped turrets provide positive click detents without accidental movement
• 1-6×24 VCOG Red MIL reticle allows universal milliradian holdovers for any caliber
• First focal plane construction ensures valid ballistic holdovers across all magnifications
• Powered by a common AA battery delivering up to 700 hours of continuous run time
• Integrated thumbscrew mount clamps Picatinny receiver rails with rigid tension

Erector Mechanical Precision

Precision internal erector assemblies utilize heavy-duty erector springs to ensure precise tracking repeatability within 1 percent across the entire 26 MRAD adjustment range. Rated for 1000G shock loads, this Trijicon combat optic absorbs continuous automatic rifle fire without zero alignment shift. Internal erector springs resist thermal expansion from -20°F to 140°F, preserving zero stability through temperature swings.

Mount Clearance Guide

The integrated thumbscrew mount requires 4.0 inches of rail space on flat-top MIL-STD 1913 Picatinny carbine upper receivers. Tighten dual thumbscrew clamps to 45 in-lbs to eliminate mounting shift under recoil. The 4.0-inch eye relief provides ample clearance on combat rifles, while the optical centerline aligns perfectly with standard AR co-witness height.

Stand Field Operation

The integrated magnification dial features an aggressive fin that rotates with 10 in-lbs of rotational drag across variable outdoor temperatures. This 23.2-ounce combat optic is not built for precision benchrest rifle matches where 24x+ magnification is mandatory, nor for sporting handguns.

• Clean dust from objective glass surfaces using optical microfiber wipes every 200 rounds
• Check integrated thumbscrew clamp torque on receiver rails every 300 rounds
• Examine rotary illumination rheostat contacts and replace AA battery cells every 12 months

Factory Warranty Coverage

Trijicon covers the VCOG with a limited lifetime warranty against manufacturing defects, with electronics covered for 5 years. The factory crate includes the riflescope, integrated thumbscrew mount, AA lithium battery, lens pen, user manual, and certified optical inspection documentation.