Trijicon 1-6×24 VCOG Riflescope (Red Segmented Circle .308/175 Reticle, Thumbscrew Mount)

Description

True 30mm main tube internal travel anchors Trijicon 1-6×24 VCOG Riflescope units featuring the Red Segmented Circle reticle calibrated for 175-grain .308 Winchester ammunition. Supplying an integrated thumbscrew mount, 0.1 MRAD clicks, and 26 MRAD elevation travel, this optic incorporates first focal plane ballistic holdovers. The calibrated .308 grid simplifies long-range drops, though lighter 147-grain military ball requires trajectory compensation.

Forged from aircraft-grade 7075-T6 aluminum bar stock, the unibody housing eliminates ring movement under heavy recoil forces. Multi-coated broadband lenses feature proprietary coatings that transmit high ambient photons for clean target separation at sunset. This Trijicon combat optic measures 10.05 inches in length, weighs 23.2 ounces, and resists internal fogging through dry nitrogen gas purging.

Key Features of Trijicon 1-6×24 VCOG .308 Red Circle

Designated marksmen buy Trijicon 1-6×24 VCOG riflescope models to equip battle rifles with rapid 1x close-quarters capability and precise 6x long-range 175-grain holdovers. The unibody housing eliminates ring slippage entirely under violent semi-automatic recoil.

• Forged 7075-T6 unibody construction provides extreme durability without mounting rings
• 1-6x magnification range resolves target silhouettes across close rooms to extended fields
• 24mm objective lens balances twilight brightness with low mounting profiles
• 0.1 MRAD capped turrets prevent accidental movement while moving through thick brush
• 1-6×24 VCOG Red Segmented Circle reticle provides calibrated drops for 175gr .308
• First focal plane design keeps crosshair measurements true at every power setting
• Powered by a common AA battery delivering up to 700 hours of continuous run time
• Integrated thumbscrew mount clamps receiver rails with rigid tension

Thermal Erector Stability

Dual steel erector springs maintain continuous pressure against the internal adjustment tube to resist reticle drift across 1000G recoil cycles. Adjustment dials provide crisp 0.1 MRAD clicks with tracking accuracy within 1 percent across the entire travel arc. Built to operate without grease migration between -20°F and 140°F, this Trijicon mechanism preserves shot-to-shot zero stability during cold winter deployments.

Chassis Ring Alignment

The integrated thumbscrew mount requires 4.0 inches of rail space on flat-top MIL-STD 1913 Picatinny carbine upper receivers. Tighten dual thumbscrew clamps to 45 in-lbs to eliminate mounting shift under recoil. The 4.0-inch eye relief provides ample clearance on combat rifles, while the optical centerline aligns perfectly with standard AR co-witness height.

Tactical Handling Protocols

Smooth diopter adjustment collars allow fast reticle focus without gritty thread friction, while the rotary illumination dial offers six daylight brightness steps. This 23.2-ounce scope is not designed for ultralight mountain rifles under 6 lbs where minimal pack weight is required, nor for short-range slug shotguns.

• Clear dirt from ocular lenses with canned air and soft brushes every hunt
• Verify thumbscrew base clamp tightness on receiver rails every 250 rounds
• Replace internal AA batteries and inspect compartment seals every 12 months

Verified Warranty Terms

Trijicon supports the original owner with a comprehensive limited lifetime warranty covering mechanical components, internal lenses, and waterproof seals, with 5 years on electronics. Unboxing reveals the combat riflescope, integrated thumbscrew mount, AA lithium battery, lens pen, cleaning cloth, and certified quality control sheets.