Meopta 3-18×50 MeoPro Optika 6 RD FFP Riflescope (BDC RD Reticle)

Description

Eliminate mechanical tracking backlash with Meopta 3-18×50 MeoPro Optika 6 RD FFP Riflescope optics engineered for tactical field competition. This first focal plane scope features a 30mm main tube, 0.1 MRAD clicks, and 90 MOA elevation travel. True milliradian subtensions stay proportional through all magnifications, though the reticle appears small at 3x zoom.

Machined from one-piece aircraft-grade 6061-T6 aluminum, the 30mm main tube withstands punishing magnum recoil impulses without ring distortion. Premium European optical glass features MeoBright ion-assisted multi-coatings for 91 percent light transmission, while MeoShield exterior coatings prevent surface scratching from abrasive dust. This Meopta precision scope measures 14.5 inches, weighs 30 ounces, and maintains nitrogen-purged IPX7 waterproof integrity under field squalls.

Key Features of Meopta 3-18×50 Optika 6

Discerning marksmen buy Meopta 3-18×50 Optika 6 riflescope systems to dominate extended precision rifle stages under tight time constraints. This tactical optic combines true mechanical tracking with exceptional glass resolution across every match scenario.

• 30mm aircraft aluminum monotube delivers 90 MOA internal adjustment range
• 3-18x magnification range transitions from close targets to distant steel
• 50mm objective lens assembly provides a bright 2.8mm exit pupil at 18x
• 0.1 MRAD click adjustments give tactile feedback per turret detent notch
• MeoPro Optika 6 BDC RD illuminated reticle allows rapid bullet drops
• Glass-etched first focal plane reticle maintains accurate subtensions at every zoom
• Side parallax turret corrects focus from 10 yards out to infinity
• Zero stop elevation turret returns to baseline index without over-rotation

Precision Erector Mechanics

Internal erector assemblies rely on dual coil leaf springs to ensure precise tracking repeatability within 1 percent across the entire 90 MOA elevation travel range. Rated for 1000G shock loads, this MeoPro Optika 6 platform withstands .338 Lapua Magnum recoil cycles without zero shift. The erector cell maintains precise reticle alignment from -20°F to 140°F, while sealed O-rings prevent internal lubricant evaporation. Turret indexing features 0.1 MRAD graduations that click with sharp tactile resistance through all elevation adjustments.

Mounting Clearance Space

This optic provides 5.6 inches of ring mounting space to bridge long-action Picatinny rails on Remington 700 and chassis systems. Secure scope rings between 15 and 18 in-lbs of torque, while torquing base screws to 40 in-lbs. Generous 3.94-inch eye relief prevents ocular contact during heavy magnum recoil, while the 50mm objective bell clears medium-height rings over heavy varmint barrel contours.

Turret Handling Protocols

Rubberized magnification rings deliver smooth 12 in-lbs turning resistance across freezing temperatures, assisted by a removable power throw lever. This heavy precision optic is not engineered for ultralight mountain rifles under 6 lbs where 30 ounces disrupts balance, nor for close-quarters carbines inside 25 yards.

• Clean objective glass surfaces using optical microfiber brushes every 200 rounds
• Check scope ring screw tension with a calibrated torque wrench every 500 rounds
• Inspect elevation turret O-ring seals and grease surfaces every 12 months

Meopta Heritage Warranty

Meopta covers optical and mechanical performance with an exceptional lifetime warranty against manufacturing defects. The factory crate contains the assembled riflescope, screw-in sunshade, protective rubber lens covers, thread-in throw lever, battery, lens cleaning cloth, user manual, and factory inspection certificate.