Trijicon RM02 RMR Type 2 LED Reflex Sight (6.5 MOA Red Dot Reticle, Matte Black)

Description

Forged 7075-T6 aircraft aluminum structures house Trijicon RM02 RMR Reflex Sight optics, finished in classic matte black with an auto-adjusting 6.5 MOA red dot reticle. The broad dot speeds point-blank sight alignment, though the bottom battery compartment requires sight re-zeroing following battery replacement.

Solid 7075-T6 forged aluminum forms an armored outer shell that shrugs off direct impacts during rugged tactical drills. A matte black finish prevents corrosion from sweat, rain, and bore solvents. Broadband multi-coated lenses provide sharp target resolution without distortion, while waterproof seals keep the interior dry down to 66 feet immersion depth. Weighing 1.2 ounces across a 1.8-inch chassis, this sight endures punishing pistol slide recoil.

Key Features of Trijicon RM02 RMR

Shooters who buy Trijicon RM02 RMR tactical optics acquire an ultra-reliable reflex sight built for duty sidearms. The automatic sensor regulates dot intensity without manual button manipulation across rapidly shifting light.

• 6.5 MOA red dot provides rapid sight picture acquisition during defensive draws
• Automatic illumination sensor adjusts LED intensity to ambient conditions in real time
• Patented housing shape diverts impact force away from the lens to survive heavy drops
• Matte black hard-coat anodizing resists holster wear and chemical solvent degradation
• Rugged battery contacts maintain continuous power through violent slide cycling shock
• Trijicon RM02 RMR chassis withstands continuous 1000G firearm recoil impulses
• 1 MOA click adjusters deliver tactile windage and elevation tracking across 150 MOA travel
• True-Color multi-coated lens transmits bright imagery with minimal target tint

Slide Recoil Internal Durability

Internal elevation adjusters move in 1 MOA click increments, offering 150 MOA total adjustment span that tracks within 1 percent of true calibration. Upgraded Type 2 battery contacts prevent circuit breakages during violent pistol slide cycling. The electronic circuit functions without failure across thermal extremes from -40°F to 140°F, holding mechanical zero through thousands of rounds.

Slide Interface Footprint Bounds

The sight mounts directly onto standard RMR footprint cuts using two 6-32 socket screws torqued to 12 in-lbs. The 1.8-inch chassis matches standard duty pistol slides without snag points. Unlimited eye relief allows shooters to maintain an open target-focused sight picture from any presentation angle.

Field Protocol Negative Demarcation

Built for combat sidearms and close-range carbines, this non-magnified reflex optic is not engineered for long-range rifle shooting where target identification past 300 yards requires magnification. Users must check for debris over the open LED emitter window.

• Confirm mounting screw torque with an accurate driver every 500 rounds
• Clean external glass surfaces with lens cleaner and microfiber every 100 rounds
• Replace the bottom CR2032 battery cell every 12 months to maintain constant readiness

Certified Warranty Packaged Gear

The RMR housing and lens assembly carry a limited lifetime warranty, while electronic LED parts feature 5-year coverage. Shipments contain the matte black RM02 Type 2 sight, CR2032 battery, mounting screws, hex key, and user handbook.