Trijicon 1-6×24 Credo HX Riflescope (Green MOA Segmented Circle Reticle)

Description

Eliminate mechanical tracking backlash with Trijicon 1-6×24 Credo HX Riflescope optics built with first focal plane minute-of-angle scaling and vibrant green LED illumination. Built with a 30mm tube, 1/4 MOA clicks, and 100 MOA elevation travel, this optic incorporates the MOA Segmented Circle reticle. Subtensions remain true across all magnifications, though the crosshair appears fine at 1x zoom without illumination.

Constructed around a solid 30mm tube milled from 6061-T6 structural aluminum, the chassis withstands severe structural twisting on heavy hunting rifles. Multi-coated broadband optical glass delivers high light throughput and vivid natural color reproduction across open fields. This Trijicon hunting scope measures 10.9 inches overall, weighs 18.9 ounces, and features nitrogen gas purging that meets rigorous IPX7 submersion standards against foul weather moisture.

Key Features of Trijicon 1-6×24 Credo HX MOA

Open-country hunters buy Trijicon 1-6×24 Credo HX riflescope packages to execute fast both-eyes-open snap shots while retaining precise MOA holdovers at maximum magnification. The user-selectable green LED illumination provides crisp aiming contrast against dark timber foliage.

• 30mm structural aluminum body tube provides 100 MOA of total elevation
• 1-6x zoom assembly provides versatile framing across close brush out to distance
• 24mm front objective glass gathers light for twilight target identification
• 1/4 MOA tactile turret clicks register sharp distinct mechanical notches
• 1-6×24 Credo HX Green MOA Segmented Circle reticle enables rapid point-shooting
• First focal plane etched glass ensures valid measurements across all magnifications
• Ten brightness settings with intermediate off positions between each intensity step
• Capped zero-reset turrets safeguard zero settings against bumps in dense timber

Precision Erector Mechanics

Internal erector assemblies rely on dual coil leaf springs to ensure precise tracking repeatability within 1 percent across the entire 100 MOA elevation travel range. Rated for 1000G shock loads, this Trijicon optic platform withstands .300 Win Mag recoil cycles without zero shift. The erector cell maintains precise reticle alignment from -20°F to 140°F, while sealed O-rings prevent internal lubricant evaporation.

Mounting Clearance Space

This optic provides 5.5 inches of ring mounting space to bridge one-piece cantilever mounts on AR-15 and AR-10 flat-top receivers. Secure scope rings between 15 and 18 in-lbs of torque, while torquing base screws to 40 in-lbs. Generous 3.5-inch eye relief prevents ocular contact during heavy centerfire recoil, while the 24mm straight tube fits low mounting rings cleanly.

Match Handling Protocols

The smooth zoom ring operates with 8 in-lbs of rotational resistance to allow fast magnification changes without shifting firearm purchase, assisted by an included throw lever. This low-power hunting optic is not engineered for dedicated 1000-yard benchrest matches where 24x+ magnification is required, nor for extreme long-range ELR matches.

• Wipe dust from lens coatings using an optical lens pen every 250 rounds
• Confirm 30mm ring torque limits on receiver mounting fasteners every 500 rounds
• Inspect rotary illumination dial contacts and replace CR2032 cells every 12 months

Factory Warranty Coverage

The optic carries Trijicon limited lifetime warranty protection backing all mechanical assemblies, housing seals, and internal glass elements, with 5 years on electronics. Inside the shipping box, users receive the riflescope, bikini lens covers, throw lever, CR2032 battery, microfiber cloth, and instruction manual.