Steiner 3-18×56 T6Xi Riflescope (MSR2 Reticle)

Description

Struggling with turret tracking backlash? The Steiner 3-18×56 T6Xi Riflescope equipped with an oversized 56mm objective and the illuminated MSR2 reticle delivers low-light precision. Featuring a 34mm tube, 0.1 MRAD clicks, and 30 MRAD elevation travel, this optic incorporates Never-Lost locking turrets. The massive 56mm objective gathers abundant twilight photons, though the 34.5-ounce chassis demands stout mounting hardware.

Machined from one-piece aircraft-grade 6061-T6 aluminum, the 34mm main tube withstands punishing magnum recoil impulses without ring distortion. Premium German optical glass features multi-coatings for exceptional light transmission and sharp contrast lines. This Steiner precision scope measures 13.5 inches, weighs 34.5 ounces, and maintains nitrogen-purged IPX7 waterproof integrity under field squalls.

Key Features of Steiner 3-18×56 MSR2

Precision marksmen buy Steiner 3-18×56 T6Xi riflescope packages to secure maximum exit pupils and true milliradian tracking during late evening match stages. The Never-Lost turret design displays second-rotation numbers through mechanical visual windows.

• 34mm aircraft aluminum monotube delivers 30 MRAD internal adjustment range
• 3-18x magnification range transitions from mid-range targets to distant steel plates
• 56mm objective lens assembly provides a massive exit pupil for twilight clarity
• 0.1 MRAD click adjustments give tactile feedback per exposed turret detent notch
• 3-18×56 T6Xi MSR2 reticle allows rapid bullet drop compensation and wind holds
• First focal plane reticle maintains accurate subtensions across all magnifications
• Side parallax turret corrects focus from 25 yards out to infinity
• Never-Lost locking elevation turret returns to baseline index without over-rotation

Recoil Hardened Erector

Internal erector assemblies rely on dual coil leaf springs to ensure precise tracking repeatability within 1 percent across the entire 30 MRAD elevation travel range. Rated for 1000G shock loads, this Steiner platform withstands .338 Lapua Magnum recoil cycles without zero shift. The erector cell maintains precise reticle alignment from -20°F to 140°F, while sealed O-rings prevent internal lubricant evaporation.

Chassis Ring Placement

This optic provides 5.8 inches of ring mounting space to bridge long-action Picatinny rails on precision chassis systems. Secure scope rings between 15 and 18 in-lbs of torque, while torquing base screws to 45 in-lbs. Generous 3.8-inch eye relief prevents ocular contact during heavy magnum recoil, while the 56mm objective bell mandates high mounting rings over heavy varmint barrel contours.

Turret Handling Protocols

Rubberized magnification rings deliver smooth 10 in-lbs turning resistance across freezing temperatures, while the side illumination dial provides eleven brightness levels. This precision optic is not engineered for ultralight mountain rifles under 6 lbs where 34.5 ounces disrupts balance, nor for close-quarters carbines inside 25 yards.

• Clean objective glass surfaces using optical microfiber brushes every 200 rounds
• Check scope ring screw tension with a calibrated torque wrench every 500 rounds
• Clean locking turret splines and inspect rubber O-rings every 12 months

Factory Warranty Manifest

Steiner covers optical and mechanical performance with an exceptional Heritage lifetime warranty against manufacturing defects. The factory crate contains the assembled riflescope, throw lever, flip-up lens covers, CR2032 battery, lens cleaning cloth, user manual, and factory inspection certificate.