Bushnell 3.5-21×50 Elite Tactical DRS3 Riflescope (G4P Reticle)

Description

Dial elevation corrections past 1200 yards through the Bushnell Elite Tactical DRS3 Riflescope, featuring a G4P precision reticle, 34mm monotube, and RevLimiter zero stop turrets. Designed for precision rifle series matches and long-range military deployment, it delivers 32 MRAD total elevation travel with 0.1 MRAD adjustments, granting clean milliradian holds while demanding high scope ring clearances.

Crafted from high-tensile aircraft aluminum, the thick-walled 34mm chassis isolates internal erector gears from receiver strain. Premium ED Prime optical glass features index-matched coatings, maintaining razor target edges in overcast dusk. Argon purging eliminates internal moisture hazards, yielding IPX7 submersible sealing. Tipping scales at 31.8 ounces with a 13.2-inch length, this optic anchors heavy precision rifles, representing high-performance Bushnell tactical optic engineering.

Key Features of Bushnell Elite Tactical DRS3

Precision shooters buy Bushnell Elite Tactical DRS3 optics to gain competitive advantages on barricade stages. The G4P reticle provides clean floating center dot aiming without cluttering the target field.

• 50mm objective lens pulls generous ambient illumination for clean target separation
• 3.5-21x magnification ratio spans mid-range tactical scanning and extreme steel engagements
• 0.1 MRAD tactical turrets click positive and loud for error-free ballistic adjustments
• 32 MRAD total erector travel accommodates steep trajectory drops on 6.5 Creedmoor
• Front focal plane G4P tactical reticle provides exact hash holdovers at every zoom power
• RevLimiter zero stop mechanism guarantees immediate return to zero without counting clicks
• Elite Tactical precision riflescope internal springs hold alignment through intense match schedules
• Side focus parallax turret adjusts focal sharpness from 25 yards to infinity without reach

Precision Match Erector Shock Tolerances

Hand-fitted internal erector systems utilize dual steel tension springs, maintaining tracking accuracy within 1 percent across the 32 MRAD elevation span. The 0.1 MRAD turrets offer distinct tactile detents, eliminating backlash under high-speed dialing. Tested to withstand 1000G shock loads, this optic tolerates continuous recoil from .300 Win Mag platforms. Thermal tolerances run from -20°F to 140°F, preserving erector lubricants without internal vapor release.

Heavy Chassis Scope Ring Placement

The 34mm tube requires heavy-duty 34mm rings with 5.8 inches of receiver mounting room. High rings allow the 50mm objective bell to clear forward tactical handguards on flat-top rifles. Torque ring fasteners to 18 to 20 in-lbs and mount base nuts to 45 to 50 in-lbs. Eye relief sits at 3.74 inches, offering protection against heavy recoil.

Competition Optic Usability Maintenance Routine

The power selector ring turns with firm mechanical resistance, stopping unintentional zoom shifts during fast field carry. This competition optic is not engineered for close-range shotgun hunting or ultralight mountain hunting rifles where large 34mm tubes add excessive bulk. Implement structured armorer maintenance to maintain factory performance.

• Wipe dust and debris from optical glass using a clean lens cloth every 200 rounds
• Inspect scope mount fasteners with an accurate torque tool every 500 rounds
• Clean external turret threads and inspect rubber cap seals every 12 months

Bushnell Elite Tactical Shipping Manifest

Bushnell covers this optic with their no-questions-asked lifetime Ironclad Warranty. The retail shipment includes the 3.5-21×50 DRS3 riflescope, sunshade, flip-up lens covers, adjustment hex wrench, microfiber lens cloth, and factory instruction manual.