Euromex NZ1703-B Evo Trinocular Double Arm Boom System

Description

Log micro-fractures in automotive circuit modules using the Euromex NexiusZoom Evo NZ.1703-B Trinocular dual-arm boom workstation. Driven by an upgraded 0.65x to 5.5x Greenough engine (8.4:1 zoom ratio), it spans 6.5x to 55x magnification with tactile click-stops for rapid dimensional logging. The double-arm boom extends 500 mm horizontally on twin linear ball bearings, floating your optics over massive circuit trays. A dedicated 23.2 mm vertical photo port with an internal beam splitter lets you stream live video directly to quality-assurance screens while viewing through ultra-widefield HWF 10x/23 mm eyepieces.

Weighing 21.2 kg, the dense 610 x 230 mm cast-iron base plate anchors the entire assembly firmly, keeping the center of gravity low even when the boom is racked out to its maximum 500 mm reach. The solid 400 mm vertical steel tower provides abundant elevation clearance over tall test fixtures and tooling vises. Bilateral diopter adjustment rings on both 45-degree ocular barrels balance eye strength differences across a 54 mm to 75 mm interpupillary range, while the passive 76 mm focus carrier accepts standard external high-intensity LED ring illuminators without electrical interference.

Key Features of Euromex NexiusZoom Evo NZ.1703-B Trinocular

An industrial trinocular stereo zoom microscope featuring a dual-arm linear ball-bearing boom stand and an 8.4:1 zoom engine. Combines 6.5x to 55x magnification with an ultra-wide 23 mm field of view, 500 mm horizontal glide, and a massive 21.2 kg cast-iron base.

• Continuous 6.5x to 55x zoom magnification powered by an 8.4:1 Greenough core
• Double-arm boom with linear ball bearings provides 500 mm of effortless horizontal stroke
• Dedicated vertical 23.2 mm photo port with mechanical beam splitter for digital archiving
• Ultra-widefield HWF 10x/23 mm high-eyepoint eyepieces with bilateral diopter collars
• Oversized 610 x 230 mm cast-iron base plate delivers 21.2 kg of vibration-free ballast
• Solid 400 mm vertical steel column accommodates deep specimen clearance heights
• Integrated zoom click-stops for rapid and repeatable magnification calculation setups
• Non-electrical passive chassis accepts external high-intensity LED ring lights

Double-Arm Ball-Bearing Glide & Linear Board Scanning

Single-boom arms can bind or pitch off-axis when carrying heavy cameras, but the twin hardened steel shafts on this stand distribute the weight evenly across sealed ball-bearing sleeves. Technicians can guide the optical pod across wide multi-layer motherboards with fingertip force, stopping instantly without backlash. The Greenough optical paths produce genuine 3D spatial depth, making delicate hand-soldering and trace repair feel completely natural.

21.2kg Cast-Iron Ballast & Dedicated Video Output

At 21.2 kg, this heavy free-standing base eliminates the need for through-table bolts or edge clamps that could damage expensive workbenches. The scratch-resistant industrial finish shrugs off shop-floor wear, while the low center of gravity stops forward tipping during aggressive scanning passes. Engaging the photoport beam splitter directs clean optical data to your digital sensor, letting you document micro-cracks on an inspection monitor while keeping both oculars active.

• Dual-rail boom design stops optical pod twisting and sagging under heavy camera loads
• Heavy-duty cast base keeps the center of gravity low even at maximum 500 mm reach
• Bilateral diopter rings balance visual focus for technicians wearing corrective eyewear

Euromex Five-Year Mechanical & Optical Warranty

Euromex backs the NexiusZoom Evo NZ.1703-B with a comprehensive five-year factory warranty covering optical elements, linear bearing tracks, and chassis structural integrity under professional industrial use. The complete package contains the NexiusZoom Evo trinocular head, double-arm boom stand assembly with cast-iron base, 76 mm focus block, 23.2 mm photo port extension tube, rubber eyeguards, and user manual.