Trijicon SRO Adjustable LED Reflex Sight (5 MOA Red Dot)

Description

Severe dot tracking delay halts with Trijicon SRO Reflex Sight optics equipped with an expansive 5.0 MOA red dot. Offering 1 MOA clicks, 150 MOA travel, and an oversized circular window, this optic delivers instant visual pickup on speed steel targets, trade-off being lower precision on small targets past 50 yards.

Forged 7075-T6 aluminum forms the protective frame, dispersing slide acceleration energy away from the optical glass. Multi-coated optical glass provides high light transmission through the clear 25×22.5mm aperture. Waterproof down to 10 feet, this sight measures 2.2 inches in length and weighs 1.6 ounces with battery, finished in matte black hardcoat anodizing.

Key Features of Trijicon SRO

Buy Trijicon SRO optics to dominate close-range speed courses and steel challenge stages. This open reflex sight provides rapid dot tracking for competitive marksmen seeking split-second target transitions.

• 5.0 MOA bright red dot reticle allows instant sight pickup during rapid presentations
• 1 MOA mechanical adjusters deliver positive tactile clicks for fast sight calibration
• 150 MOA adjustment range compensates for diverse bullet trajectories and pistol barrel angles
• Top-access battery compartment permits cell swaps without losing target zero position
• Reinforced Trijicon SRO circuit boards absorb continuous semi-automatic slide cycling shock
• Curved 7075-T6 aluminum housing structure provides structural defense against side impacts
• 8 manual brightness settings feature automatic ambient sensor regulation modes
• Expansive optical aperture delivers clear sight pictures for heads-up two-eyes-open shooting

Mechanical Slide Load Tolerances

Designed to ride high-speed match handgun slides, the internal circuitry absorbs 1000G recoil cycles from +P 9mm ammunition. Brass tracking screws adjust in 1 MOA graduation increments through 150 MOA travel without zero shift. Silicone perimeter gaskets prevent water intrusion across extreme operating temperatures between -20°F and 140°F.

Mounting Platform Interface Bounds

This optic mounts to standard RMR pattern slide cuts or rail adapter plates using two 6-32 Torx screws. Fasten screws to 13 to 15 in-lbs using medium-strength thread locking compound. The forward-extended housing overhang requires verifying clearance on firearms with tight ejection ports or forward-set rear sights.

Competition Operations Maintenance Schedule

Large side push buttons provide responsive control for switching between daylight settings and lockout modes. This large 5.0 MOA dot optic is not built for precision bullseye target pistols at 100 yards where fine sub-MOA aiming is required.

• Wipe carbon residue off the curved front glass every 100 rounds
• Verify base screw torque with an inch-pound tool every 250 rounds
• Replace the top-mounted CR2032 battery cell every 12 months

Manufacture Warranty Enclosure Contents

Trijicon backs the forged chassis with a limited lifetime warranty and covers electronic components for 5 years. Inside the box rests the reflex optic, CR2032 battery, Torx wrench, mounting screws, and factory instruction sheet.