Trijicon RM07 RMR Type 2 Adjustable LED Reflex Sight with RM33 Mount (6.5 MOA Red Dot, Matte Black)

Description

True 7075-T6 forged aluminum housing anchors Trijicon RM07 RMR Type 2 Reflex Sight units fitted with an RM33 Picatinny mount. Delivering a 6.5 MOA red dot, 1 MOA clicks, and 150 MOA internal travel, this configuration provides rapid CQB target acquisition on submachine guns, with slightly coarse subtensions on targets beyond 100 yards.

Forged 7075-T6 aluminum creates an arched body that routes force paths around the optical glass. Broadband multi-coated optical lenses maintain pure edge-to-edge clarity through the 28x19mm window. Waterproof down to 66 feet, this sight with RM33 mount weighs 2.8 ounces and measures 1.8 inches long, ready for harsh tactical field conditions.

Key Features of Trijicon RM07

Buy Trijicon RM07 RMR setups to equip Picatinny rail weapons with an ultra-rugged close-quarters aiming solution. This red dot combination provides rapid point-and-shoot target transitions during dynamic tactical drills.

• 6.5 MOA illuminated dot reticle delivers rapid center-mass alignment on close targets
• 1 MOA audible dial clicks allow fast zeroing without special turret tools
• 150 MOA internal adjustment range compensates for substantial ballistic drop angles
• RM33 low Picatinny mount secures optic to MIL-STD-1913 rails cleanly
• Ruggedized RM07 RMR battery terminals withstand continuous carbine and shotgun recoil
• Forged aluminum housing deflects harsh direct impacts away from delicate glass
• 8 output settings include two night vision compatible power options for night operations
• Button lockout feature keeps sight illumination fixed at selected level during patrol

Recoil Management Ballistic Performance

Tested on 12-gauge tactical shotguns and short-barrel carbines, the internal electronics withstand heavy recoil impulses up to 1000G without illumination flicker. Elevation and windage adjustments move in 1 MOA increments through 150 MOA total travel, maintaining zero repeatability across thousands of rounds. O-ring seals protect the housing against water ingress, functioning without internal fogging from -40°F to 120°F.

Picatinny Clamp Rail Attachment

The RM33 cross-bolt mount clamps directly to MIL-STD-1913 Picatinny rail sections on carbine upper receivers or shotgun top rails. Tighten the cross-bolt nut to 45 in-lbs to establish rigid rail lockup. Scope base screws connecting optic to mount require 15 in-lbs. The low height places the optical axis close to the bore for tight cheek welds on traditional stock combs.

Practical Operations Maintenance Schedule

Large side-mounted push buttons allow fast brightness toggling between dark indoor rooms and bright outdoor ranges. This 6.5 MOA unmagnified optic is not suitable for precision varmint hunting past 300 yards requiring high magnification crosshairs.

• Check RM33 mount rail cross-bolt torque every 200 rounds
• Clean the emitter lens recess using canned air every 500 rounds
• Inspect lithium battery compartment seals every 12 months

Manufacture Warranty Package Components

Trijicon provides a limited lifetime housing warranty alongside a 5-year electronics warranty. The retail shipping box contains the reflex sight, RM33 Picatinny mount, CR2032 lithium battery, Torx wrench, Allen key, and factory manual.