Trijicon RM06 RMR Type 2 Adjustable LED Reflex Sight with RM34 Mount (3.25 MOA Red Dot, Matte Black)

Description

Demanding absolute co-witness on carbines? The Trijicon RM06 RMR Reflex Sight kit aligns with backup iron sights using an adjustable 3.25 MOA red dot and tall RM34 mount. The tall base supports natural heads-up shooting, though the taller profile requires open transport cases to prevent snagging during vehicle transit.

Solid 7075-T6 forged aluminum forms an armored outer shell that shrugs off direct impacts during rugged tactical drills. A matte black finish prevents corrosion from sweat, rain, and bore solvents. Broadband multi-coated lenses provide sharp target resolution without distortion, while waterproof seals keep the interior dry down to 66 feet immersion depth. Weighing 3.1 ounces with mount across 1.8 inches, this optic absorbs punishing carbine recoil.

Key Features of Trijicon RM06 RMR

Carbine marksmen who buy Trijicon RM06 RMR reflex packages attain instant optical aiming aligned with backup iron sights. Push buttons on the housing flanks provide eight distinct brightness settings to conquer varied outdoor lighting.

• 3.25 MOA red dot provides versatile aiming balance between speed and mid-range precision
• RM34 tall mount provides true absolute co-witness alignment with AR-15 iron sights
• Push-button illumination controls allow instant manual brightness adjustments across 8 levels
• Button lock-in mode keeps chosen illumination levels fixed during dynamic movement
• Upgraded Type 2 battery terminals survive continuous violent semi-automatic recoil forces
• Trijicon RM06 RMR chassis withstands continuous 1000G firearm recoil impulses
• 1 MOA click adjusters deliver tactile windage and elevation tracking across 150 MOA travel
• True-Color multi-coated lens transmits bright imagery with minimal target tint

Slide Recoil Internal Durability

Internal elevation adjusters move in 1 MOA click increments, offering 150 MOA total adjustment span that tracks within 1 percent of true calibration. Upgraded Type 2 battery contacts prevent circuit breakages during violent firearm cycling. The electronic circuit functions without failure across thermal extremes from -40°F to 140°F, holding mechanical zero through thousands of rounds.

Co-Witness Mount Rail Interface

The RM34 tall mount clamps to standard Picatinny receiver rails with cross-bolts torqued to 45 in-lbs. The optical centerline sits at 1.4 inches above the rail, aligning directly with mil-spec iron sight apertures. Unlimited eye relief allows shooters to maintain an open target-focused sight picture from any presentation angle.

Field Protocol Negative Demarcation

Built for tactical carbines and patrol rifles, this non-magnified reflex optic is not engineered for long-range rifle shooting where target identification past 300 yards requires magnification. Users must check for debris over the open LED emitter window.

• Confirm RM34 base screw torque with an accurate driver every 250 rounds
• Clean external glass surfaces with lens cleaner and microfiber every 100 rounds
• Replace the bottom CR2032 battery cell every 12 months to maintain constant readiness

Certified Warranty Packaged Gear

The RMR housing and lens assembly carry a limited lifetime warranty, while electronic LED parts feature 5-year coverage. Shipments contain the matte black RM06 Type 2 sight, RM34 tall mount, CR2032 battery, hex key, and user handbook.