Trijicon 4×32 ACOG Riflescope with TA51 Mount (?Red Chevron Dual-Illuminated Reticle)

Description

Forged 7075-T6 aircraft aluminum alloy encases Trijicon 4×32 ACOG Riflescope internal prisms, featuring a red chevron dual-illuminated reticle with an included TA51 mount. Fixed 4x magnification speeds target recognition across medium ranges, though the short 1.5-inch eye relief requires rigid mounting positioning on standard carbine receivers.

Machined from heavy-duty 7075-T6 forged aluminum, the armor-grade chassis withstands severe combat vehicle vibrations and rough handling. Multicoated internal lenses preserve high light transmission from early dawn into sunset twilight, while dry nitrogen gas seals prevent interior glass condensation down to 100 feet immersion depth. Weighing 9.9 ounces across a 5.8-inch chassis, this sighting system absorbs violent drop shocks without shifting mechanical zero points.

Key Features of Trijicon 4×32 ACOG

Operators who buy Trijicon 4×32 ACOG dual-illuminated units gain unmatched speed across varied engagement distances. The red chevron reticle sharpens target contrast across dense field brush and low-light urban structures.

• 4x fixed prism magnification delivers instant target identification past 400 yards
• 32mm objective lens diameter pulls maximum ambient illumination into the optical train
• Dual fiber optic and tritium power sources light the red chevron without batteries
• .223 ballistic drop markings allow rapid elevation holdovers across extended ranges
• 1/2 MOA windage and elevation click screws track true across 40 MOA total travel
• Trijicon 4×32 ACOG matte black housing withstands brutal 1000G mechanical drop shocks
• Glass-etched reticle pattern eliminates internal wire breakage during violent firearm recoil
• TA51 flattop mount attaches directly onto mil-spec 1913 Picatinny receiver rails

Fixed Prism Optical Construction

Internal roof prism geometry preserves edge-to-edge optical resolution across extreme field temperatures from -40°F to 140°F. Windage and elevation dials supply 1/2 MOA click increments with 40 MOA total internal adjustment range, returning to true zero through repetitive field impacts. Glass-etched chevron lines eliminate physical reticle wire breakage under magnum shock spikes up to 1000G force. Fixed parallax factory-set at 100 yards keeps the aiming point locked onto target silhouettes without manual turret manipulation.

Mil-Spec Receiver FlatTop Interface

The integral base matches MIL-STD-1913 Picatinny rails with twin thumb screws torqued to 45 in-lbs for non-slip lockup. Compact 5.8-inch chassis length preserves top rail space forward of the receiver for inline clip-on thermal optics. Eye relief measures 1.5 inches, requiring shooters to position stock length of pull for forward nose-to-charging-handle cheek weld locations on AR-15 pattern upper receivers.

Field Maintenance Negative Constraints

Designed for combat carbines, this fixed prism sight is not engineered for benchrest group shooting past 800 yards where variable high magnification scopes dominate. The optical format requires zero battery replacement, simplifying logistics across remote field deployments.

• Inspect base mount thumb screw tension every 250 rounds to verify zero retention
• Clear outer optical surfaces using clean air bursts before wiping lenses with soft microfiber
• Store inside non-conductive scope cases away from petroleum solvent puddles every 12 months

Factory Inspection Warranty Manifest

Trijicon backs optical components and structural housing metals with a verified limited lifetime warranty, covering tritium illumination materials for 15 years from initial manufacture date. Each crate arrives packed with the 4×32 red chevron ACOG unit, TA51 rail mount, protective neoprene Scopecoat, lens cleaning pen, and official inspection cards.