Trijicon 4.5-30×56 Tenmile Riflescope (Precision Tree MOA Reticle)

Description

True 34mm main tube geometry anchors Trijicon 4.5-30×56 Tenmile Riflescope units boasting first focal plane MOA precision tree reticles. Featuring 4.5-30x magnification, a 56mm objective lens, 1/4 MOA clicks, and 100 MOA elevation travel, this optic accelerates extreme-distance hits. The first focal plane system maintains exact subtension values across all power settings for rapid holdoffs.

Monolithic 6061-T6 aircraft aluminum forms the oversized 34mm tube body, defending internal erector components from intense magnum recoil impulse waves. Extra-low dispersion optical glass elements maximize light transmission, eliminating chromatic fringing across high-contrast target silhouettes at 30x power. Dry nitrogen gas purging prevents internal glass fogging during sudden mountain storms, maintaining waterproof submersion down to 10 feet. Weighing 38.1 ounces, this 14.3-inch optic provides supreme stability on PRS competition rifles.

Key Features of Trijicon 4.5-30×56 Tenmile

Extreme distance marksmen buy Trijicon 4.5-30×56 Tenmile riflescope systems to dominate long-range precision rifle series matches. The illuminated MOA tree reticle provides rapid windage and elevation holdoffs without touching elevation knobs.

• First focal plane reticle architecture maintains mathematically true MOA subtensions across all zoom magnifications
• Dual red and green illuminated precision tree reticle provides optimal contrast against varied match backdrops
• 4.5-30x magnification span resolves fine target details and mirage layers out past 1000 yards
• 56mm objective lens captures maximum ambient photons during overcast dawn and dusk shooting stages
• 34mm aircraft aluminum main tube accommodates 100 MOA internal elevation adjustment travel for steep trajectories
• 1/4 MOA exposed zero stop elevation turrets allow fast adjustments and positive mechanical zero return
• Side focus parallax dial corrects optical focus and reticle wander from 20 yards to infinity

Heavy Magnum Erector Tracking Calibration

Tactile 1/4 MOA turret click detents deliver 100 MOA total elevation and 50 MOA windage travel within the massive 34mm housing. Hardened mechanical track guides prevent erector spring fatigue, holding point of impact within 1 percent across thousands of heavy magnum rounds. Recoil tested to withstand 1000G impact pulses, this optic resists internal component shift on unbraked .338 Lapua rifles. Functioning between -20°F and 140°F, the solid-state illumination circuit prevents power drops. Side focus dial adjusts target focus from 20 yards out to infinity.

Chassis Ring Interface Fitment Bounds

The 34mm main tube requires matching 34mm scope rings or monolithic cantilever mounts. Torque ring cap screws to 18 in-lbs and base clamp bolts to 45 in-lbs on Picatinny receiver rails. A 3.8-inch eye relief and 2.6-inch objective bell diameter provide ample clearance over heavy bull barrel contours.

Field Handling Usability Maintenance Routine

Dual-color rotary illumination controls feature five red and five green brightness steps with off positions between numbers. NEGATIVE FILTER: This optic is not intended for lightweight mountain hunting rifles where a 38.1-ounce scope chassis destroys balance, nor brush carbines operating inside 50 yards.

• 100 rounds inspection intervals require checking 34mm ring cap screw torque with an accurate torque wrench
• 250 rounds service cycles require inspecting battery compartment cap seals and cleaning turret thread surfaces
• 12 months maintenance demands wiping outer lenses with dedicated optical fluid and lint-free microfiber wipes

Certified Competition Warranty Package List

Trijicon backs this tactical match optic with a limited lifetime mechanical body warranty and five years on electronic LED components. The factory package contains the 4.5-30×56 Tenmile optic, 3-inch sunshade, flip-up lens covers, CR2032 battery, Lenspen cleaning tool, user manual, and factory inspection certificate.