Trijicon 1-4×24 Credo Riflescope (Red MRAD Ranging Reticle)

Description

Aircraft-grade 6061-T6 aluminum monotubes enclose the Trijicon 1-4×24 Credo Riflescope configured with red LED illumination and the MRAD Ranging reticle for tactical carbines. Built with a 30mm tube, 0.1 MRAD turrets, and 29 MRAD elevation travel, this optic incorporates calibrated milliradian holdover lines. True 1x magnification permits rapid dual-eye snap shooting, though holdovers require 4x calibration for precise distance holds.

Constructed with a continuous 30mm aluminum monotube, the housing prevents optical misalignment during violent rifle discharge cycles. Fully multi-coated broadband lenses feature anti-reflective layers that achieve bright transmission for sharp contrast against shaded backgrounds. This Trijicon tactical riflescope measures 10.5 inches overall, weighs 17.1 ounces, and features complete nitrogen gas purging that meets IPX7 waterproof standards.

Key Features of Trijicon 1-4×24 Credo Red MRAD

Tactical operators buy Trijicon 1-4×24 Credo riflescope systems to equip duty carbines with daylight-bright red LED reticle illumination and true milliradian tracking. The crisp glass provides edge-to-edge optical resolution across dynamic room-clearing distances.

• 30mm structural aluminum chassis supports 29 MRAD of internal elevation movement
• 1-4x magnification ratio provides dynamic target framing from 10 yards out to distance
• 24mm objective lens ensures bright imaging across daytime and overcast conditions
• 0.1 MRAD capped turrets protect zero settings against brush snagging during stalks
• 1-4×24 Credo Red MRAD reticle provides calibrated holdover points for elevation and wind
• Second focal plane construction preserves fine wire crosshairs across all powers
• Ten brightness settings with intermediate off positions between each intensity step
• Protective lens coatings guard optical glass against surface scratching

Internal Erector Dynamics

Hardened erector components supported by dual coil springs prevent zero drift through 1000G recoil cycles on centerfire tactical calibers. Turret screws deliver precise 0.1 MRAD click values with tracking accuracy within 1 percent across the 29 MRAD travel range. Operating reliably between -20°F and 140°F, this Trijicon erector prevents reticle shifting during severe weather extremes.

Receiver Rail Alignment

With 5.5 inches of ring mounting space, this chassis mounts cleanly onto AR-platform cantilever mounts or bolt-action rails. Fasten ring top screws to 16 in-lbs of torque, and secure base mount cross-bolts to 40 in-lbs. Expansive 3.1-inch eye relief prevents scope contact under recoil, while the 24mm objective bell clears rifle rails using low mounts.

Tactical Handling Protocols

The zoom adjustment ring rotates with smooth 8 in-lbs torque to maintain set magnification levels when pulling the rifle from soft cases. This 17.1-ounce scope is not designed for dedicated 1000-yard benchrest matches where 30x+ magnification is required, nor for extreme long-range varminting.

• Remove lens surface dust using optical brushes and lens cleaner every hunt
• Check mount clamping screws with a precision torque driver every 250 rounds
• Examine rotary illumination switch contacts and inspect battery seals every 12 months

Trijicon Warranty Summary

This optic includes Trijicon limited lifetime warranty protection covering optical performance and mechanical systems, with illumination electronics covered for 5 years. The factory box includes the complete riflescope, bikini lens covers, CR2032 battery, microfiber lens cleaning cloth, and factory bench inspection paperwork.