Swarovski 1-8×24 SR Z8i+ Riflescope (4A-IF Reticle)

Description

Seeking selectable reticle illumination modes? The Swarovski Z8i+ Riflescope in 1-8x24mm with SR rail and 4A-IF reticle delivers FLEXCHANGE reticle versatility. Featuring switchable illuminated ring options, 0.1 MRAD clicks, and an expansive field of view, this optic speeds up driven hunting, though specialized SR rail clamp mounts are required.

Constructed from lightweight aluminum with an integral mounting rail, the chassis eliminates ring torque stress on internal erector tubes. Austrian optical glass elements incorporate SWARODUR and SWAROTOP multi-coatings for 93 percent light transmission through the 24mm objective lens. Completely waterproof down to 13 feet and nitrogen purged, this optic measures 11.9 inches long and weighs 21.5 ounces.

Key Features of Swarovski Z8i+

Buy Swarovski Z8i+ riflescopes to outfit driven-game rifles with switchable center dot and illuminated ring reticle patterns. This premier European optic combines an enormous visual field, stress-free rail mounting, and high-definition glass clarity across thick timber drives.

• 1-8x magnification range spans from close-quarters snap shooting to 8x distance identification
• 24mm objective lens assembly provides an expansive, forgiving eyebox for rapid cheek welds
• Swarovski SR rail interface eliminates ring pinching and maintains permanent optic alignment
• 4A-IF reticle features FLEXCHANGE technology allowing users to toggle an illuminated outer ring
• Heavy-duty Swarovski Z8i+ internal erector springs retain zero under severe recoil
• Broadband SWAROBRIGHT coatings maximize light throughput and suppress interior reflections
• Capped low-profile turrets adjust in positive 0.1 MRAD tactile travel click detents
• Integrated throw lever allows rapid power magnification adjustments during movement

Magnum Recoil Ballistic Calibration

Engineered to handle severe hunting use, internal erector assemblies survive continuous 1000G recoil cycles from .300 Win Mag and 8x68S platforms. Internal click adjusters track in 0.1 MRAD increments across 20 MRAD travel within 1 percent tracking accuracy. Nitrogen gas purging stops internal lens fogging across thermal shifts from -4°F to 131°F.

Hunting Receiver Mounting Clearances

The integrated SR bottom rail locks into specialized receiver clamp bases, eliminating scope ring marks and tube crush damage. Tighten clamp screws to 30 in-lbs using certified torque tools. Generous 3.7-inch eye relief delivers a wide, forgiving eyebox during rapid firing strings.

Driven Hunt Usability Protocols

The illumination control unit on the ocular bell features an angle sensor that powers down the red dot when the rifle rests vertically or on its side. This 1-8x24mm optic is not engineered for dedicated benchrest competition past 600 yards where high 25x magnification is essential.

• Check SR rail clamp torque on the receiver bases every 200 rounds
• Clear dust and mud from optical glass using lens fluid every 500 rounds
• Inspect battery compartment cap O-ring and replace CR2032 cells every 12 months

Factory Guarantee Manifest

Swarovski Optik backs the optic with a 10-year optical and mechanical warranty alongside 2-year electronics coverage. The packaging includes the riflescope, throw lever, protective lens caps, CR2032 battery, lens cloth, and product manual.